Uuri lähemalt

This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices. Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output - up to 24W (up to 1A at 24V). You can power it with virtually any 42-57V PoE solutions available on market today (Passive, Telecom, 802.3af and 802.3at PoE plus supported) The device is a rugged metallic design, with high quality components and integrated heatsink design. The case also has mounting holes so you can attach it to a wall. Ethernet shield pins are inside the Ethernet connectors, so that shielded ethernet can be used, to ground either at the converter itself, or at the devices at both ends. Supports 10/100/1000Mbps Ethernet Uuri lähemalt

Uuri lähemalt

"Single-Port Long Reach Ethernet over Coax Extender > Supports IEEE802.3, IEEE802.3u standards. > Support data line (1, 2, 3, 6) PoE power supply. > Port: 1*RJ45 10/100Mbps, 1*BNC. > Supports RG59 coaxial cable: 400m/100Mbps,1000m/10Mbps. > Supports MDI/MDIX self-adaption. > Supports long range power supply transmission via coaxial cable. " Uuri lähemalt

Uuri lähemalt

Uuri lähemalt

> Supports IEEE802.3, IEEE802.3u standards. > Support data line (1, 2, 3, 6) PoE power supply. > Port: 1*RJ45 10/100Mbps, 1*BNC. > Supports RG59 coaxial cable: 400m/100Mbps,1000m/10Mbps. > Supports MDI/MDIX self-adaption. > Supports long range power supply transmission via coaxial cable. Uuri lähemalt

Uuri lähemalt

Uuri lähemalt

Uuri lähemalt

Uuri lähemalt

Uuri lähemalt

Uuri lähemalt

Uuri lähemalt

The "PoE Injector" power supply is a tool that enables simultaneous supply of both power and data to devices compatible with the PoE standard. This technology is extremely useful in a variety of applications, especially where running separate cables for power and data would be inefficient or difficult. The power supply supports power supply on two RJ45 ports, which means that the power supply can work as a two-port PoE switch. The power supply is powered by AC 230 V. AC 230 V, 802.3 af/at Uuri lähemalt

Uuri lähemalt

Uuri lähemalt

Uuri lähemalt

Uuri lähemalt

Uuri lähemalt

GPEN21 Smart power injector that serves as an advanced software controlled repeater The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE, it can also provide a range of useful software features: • Interface management and monitoring • GPEN link fault detection • VLAN support • SNMP reporting • Basic traffic shaping GPEN21 has an Ethernet and SFP port for fiber connectivity. Customers can choose to use GPEN21 to power optical module for uplink to provider, or to provide PoE to power Ethernet uplink to provider (that uses our GPeR and/or netPower products) The GPEN unit can be securely attached to a wall or the communications cabinet. The Ethernet cable can be routed either directly through its bottom cable opening or into the wall, as preferred. Uuri lähemalt

75W PoE Midspan > Supports PoE for Hi-PoE 75W high power consumption speed dome > Indicator status: power (normal power on), PoE (normal power supply) > Cooperate with PoE Extender (PFT1300), able to cascade level 2 PoE Extender, connect to 3 IPC, max transmission distance 300m > Wide working temperature: -30°C~ 65°C > Supports DoE Level VI > Lighting Protection: Level 4 Uuri lähemalt

The ePoE technology of Dahua adopts advanced 2D-PAM3 coding modulation from physical layer, and realizes full duplex transmission over 800 meters at the speed of 10Mbps, or 300 meters at the speed of 100Mbps via Cat5 or coaxial cable media. Dahua ePoE technology offer a new way to accomplish long distance transmission between IP camera and network switch. It allows more flexible surveillance system design, improves reliability and saves construction and wiring cost. Supports IEEE802.3, IEEE802.3u standards Port: 1*RJ45 10/100Mbps, 1*BNC Supports RG59 coaxial cable: 400m/100Mbps, 1000m/10Mbps Supports MDI/MDIX self-adaption Supports long range power supply transmission via coaxial cable Operating Temperature: -40°C-60°C Uuri lähemalt

The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m. Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem. Maximium allowed length of CAT6 Ethernet cable between GPeR and power source/router is up to 100 m (depending on cable quality, high quality - up to 150 m). Maximium allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality). In case if the destination device does not support PoE-in powering, the PoE Passthrough can be disabled by manually removing all jumpers. Uuri lähemalt