The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. The GPEN11 is part of the GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy ethernet alternative.   Узнать больше

Узнать больше

Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations. For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate any losses in cables. Узнать больше

GPEN21 Smart power injector that serves as an advanced software controlled repeater The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE, it can also provide a range of useful software features: • Interface management and monitoring • GPEN link fault detection • VLAN support • SNMP reporting • Basic traffic shaping GPEN21 has an Ethernet and SFP port for fiber connectivity. Customers can choose to use GPEN21 to power optical module for uplink to provider, or to provide PoE to power Ethernet uplink to provider (that uses our GPeR and/or netPower products) The GPEN unit can be securely attached to a wall or the communications cabinet. The Ethernet cable can be routed either directly through its bottom cable opening or into the wall, as preferred. Узнать больше

GESP New revision of Gigabit Ethernet Surge Protector in IP67 waterproof enclosure GESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lightning or surge damages. Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protectors on each end. They come sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm. Don’t forget about the grounding wire! Secure it to the rackmount, mast, or any other structure that is connected to the ground. For maximum protection, you should use a surge protector on both ends of long cables. Узнать больше

Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. Support DDM. SFP/ SFP+/ SFP28 Узнать больше

The MikroTik 100 Gigabit product line keeps growing: QSFP28 module for distances up to 100m MikroTik 100 Gigabit product line keeps growing: QSFP28 module for distances up to 100m Add this QSFP module for distances up to 100 meters to your CCR2216, CRS504 or CRS518 setups and enjoy real speed and ultimate reliability. This optical module offers four independent full-duplex channels with up to 25 Gbps per channel bandwidth and an aggregate bandwidth of 100 Gbps. The module has built-in digital diagnostic functions such as optical power monitoring. Узнать больше

Узнать больше

Узнать больше

Узнать больше

Узнать больше

This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices. Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output - up to 24W (up to 1A at 24V). You can power it with virtually any 42-57V PoE solutions available on market today (Passive, Telecom, 802.3af and 802.3at PoE plus supported) The device is a rugged metallic design, with high quality components and integrated heatsink design. The case also has mounting holes so you can attach it to a wall. Ethernet shield pins are inside the Ethernet connectors, so that shielded ethernet can be used, to ground either at the converter itself, or at the devices at both ends. Supports 10/100/1000Mbps Ethernet Узнать больше

Узнать больше

Узнать больше

- Works at 1000Mbps in Full-Duplex mode for both TX port and FX port - Supports auto MID/MID-X for TX port - Provides switch configuration of Force /Auto transfer mode for FX port - Extends fiber distance up to 0.5km - Easy-to-view LED indicators provide status to monitor network activity easily - External power supply Узнать больше

"Single-Port Long Reach Ethernet over Coax Extender > Supports IEEE802.3, IEEE802.3u standards. > Support data line (1, 2, 3, 6) PoE power supply. > Port: 1*RJ45 10/100Mbps, 1*BNC. > Supports RG59 coaxial cable: 400m/100Mbps,1000m/10Mbps. > Supports MDI/MDIX self-adaption. > Supports long range power supply transmission via coaxial cable. " Узнать больше

> Supports IEEE802.3, IEEE802.3u standards. > Support data line (1, 2, 3, 6) PoE power supply. > Port: 1*RJ45 10/100Mbps, 1*BNC. > Supports RG59 coaxial cable: 400m/100Mbps,1000m/10Mbps. > Supports MDI/MDIX self-adaption. > Supports long range power supply transmission via coaxial cable. Узнать больше

Узнать больше

Узнать больше

Узнать больше

Узнать больше

Узнать больше

Узнать больше

Узнать больше