GIG.EE

Корзина

0,00 €

Ваша корзина покупок пуста.

Opening sensor DoorProtect Plus (8EU) ASP white Zoom

Изображения продуктов приведены в иллюстративных целях и являются примерными. Оригинальный товар может отличаться, пожалуйста, ознакомьтесь со спецификациями товара, приведенными в описании продукта.

Opening sensor DoorProtect Plus (8EU) ASP white

Артикул (SKU): ab-852511
Код производителя: 38101.13.WH1 48231140149
GIG ID: 615837
Код производителя: 852511
Товар на складе у поставщика.
Доставка:
8-15 рабочих дней
80,89 €
   
Описание товара

    DoorProtect Plus

    The wireless magnetic sensor notifies you of the first signs of intrusion into the room through a door or window. It can even be installed on roof windows that can be left open when leaving the house.

    • Anti-forgery authentication
    • Jamming detection and encryption of communication channels
    • Tamper alertWorks without battery replacement for up to 5 years
    • It detects changes in the vertical tilt angle, shocks and vibrations
    • It has an external contact for connecting sensors from other manufacturers

    Principle of operation

    The device detects the opening of a door or window using a British high-end reed switch, which is acted on by a magnetic field. It can work in the transmitter mode, sending a signal from the wired sensor to the control panel.

    Functions

    The sensor even protects windows that are open to ventilate the room. The accelerometer detects changes in the vertical angle, impacts or vibrations and sends an alarm to the system control panel.

    Installation and assembly

    Ready to work right out of the box: the battery is already installed, so there is no need to remove the case. The sensor can be connected to the control panel with one click in the mobile application. Thanks to SmartBrackets, installation is done in just a few minutes.

    DoorProtect Plus is a wireless magnetic, shock and tilt sensor. If the standard installation method is used, the device consists of two parts: the left part (sensor) contains the reed switch and the shock and tilt sensor, and the right part is the magnet that is needed for opening detection.

    Opening is detected by a reed switch and a magnet built into the sensor. As the magnet approaches or moves away, the reed switch changes the state of the contacts and notifies of opening/closing. The sensor is equipped with one small and one large magnet. The small magnet works up to 1 cm from the reed switch, and the large one up to 2 cm. If it is not necessary to detect the opening of a door or window, a sensor without a magnet can be installed.

    The shock sensor detects attempts to break a window or kick in the door and reacts to vibrations when trying to break a lock or door.

    The tilt sensor detects the deviation of the device from the vertical axis. Before arming the system, the sensor remembers its initial position and activates when the deviation is greater than 5 degrees. This allows you to protect windows, including roof windows, as well as arm the system when the window is in ventilation mode (remember to deactivate the main sensor in the settings in this case).

    All sensors in the sensor work independently of each other. Each sensor sensor can be enabled or disabled in Ajax applications.

    When triggered, an armed sensor immediately sends an alarm to the hub, which then activates sirens connected to the system, triggers scenarios, and notifies users and the security agency. All MotionProtect Plus alarms and events are logged to the Ajax event feed.

    Users know exactly when and where the system recorded an alarm. Notifications include alarm time, alarm type, hub name (protected object name), device name and virtual room to which the sensor is assigned.

    Jeweler radio technology

    Jeweler is a wireless protocol that provides fast and reliable two-way communication between the hub and connected devices. The protocol provides instant alerts with a large amount of data: security agencies and users know at a glance which sensor has been triggered, where and when it happened.

    Jeweler uses encryption and authentication to protect the system from sabotage. It regularly polls system devices, displaying their status in Ajax applications. Jeweller operates at a distance of up to 1200 m, ensuring reliable protection of facilities and excellent experience for both system users and installers.

    Sending events to the monitoring station

    The Ajax alarm system can send events and alarms to the Ajax PRO Desktop monitoring application as well as to the Central Monitoring Station (CMS) in SurGard (Contact ID), SIA (DC-09), ADEMCO 685 and other proprietary protocols.

    • DoorProtect Plus Jeweller
    • SmartBracket mounting bracket
    • CR123A battery (installed)
    • Large magnet
    • A small magnet
    • Terminals for connecting a third-party sensor
    • Installation kit
    • Short instruction
    • Maximum effective radiated power (ERP): up to 20 mW
    • Radio signal modulation: GFSK
    • Encrypted communication
    • Radio frequency hopping (FHSS)
    • Maximum number of openings: up to 2,000,000
    • Vibration sensitivity: 3 levels
    • Option to ignore individual shocks
    • Tilt sensor activation threshold: 5° to 25°
    • Degree of protection: IP50
Дополнительная информация
    Manufacturer (A) AJAX
    Manufacturer Code 38101.13.WH1 48231140149